When the baler is used, how should it be used rationally can be regarded as the correct use. As a professional manufacturer of automatic balers in Shandong, Xiaobian will take you to understand it together.：

1.First of all, we should confirm that the power supply of the baler is several phases, do not use it incorrectly, and the power cord must be grounded, and leakage protection must be done to prevent accidents.；

2.Do not put your hands into the machine when operating the baler to prevent accidents. If you really want to repair the machine, we recommend cutting off the power supply.；

3.The environment in which the baler is used cannot be humid to prevent leakage.；

4.There is a heating sheet on the baler, which is mainly used to heat and bond the packing tape. Our operators should not put their hands in the position of the heating sheet to prevent burns.；

5.When the machine is not in use, please roll the tape in the belt storage compartment back to the belt tray to avoid deformation the next time you use it.

6.Do not stick oil on the surface of the conveyor belt roller

7.Remember to unplug the power supply when the machine is not in use.Prevent accidents

8.Do not replace the parts on the machine at will.If there are parts on the baler that need to be replaced, we must have professional maintenance personnel to carry out repairs, and don't blindly carry out repairs.

9.The main parts should be lubricated with oil frequently.Accelerate lubrication between parts

10.Formulate corresponding safety operating procedures, and operators must operate in accordance with the operating procedures to ensure safety.

The above is about how the automatic baler should be used correctly. If you don't understand anything in the later stage, you can continue to pay attention to us!