Before operation, first check whether there are foreign objects on the front and back of the machine to avoid accidents; before starting the machine, make sure that the power supply part is connected correctly. Before operation, you must check in detail whether the bolts in each part are strong, the tension of the chain and belt, and whether the cooperation between the power and the fixed knife is normal, and you must follow the correct operating direction to make the shearing motor run normally before starting the feeding motor.

If the material is found to be entangled and cut during operation, then do not pull it by hand. It must be powered off and shut down before production can continue after cleaning up.If abnormal noise or vibration occurs during operation, be sure to stop for inspection, and continue the operation after troubleshooting. When the production is completed, clean up other foreign objects on the machine to ensure the safety of the machine.