When the loosening machine is used, regarding which process operations are affected, as a manufacturer of Shandong loosening machine, let Xiaobian take you to understand it together!1.The speed of the beater of the loosening machine, the speed of the beater, directly affects the strength of the beater's strike on the cotton layer.When the cotton gu is timed and the speed of the beater is high, the loosening and impurity removal effect is good.However, the speed is too high, the impurities are easy to break, and the white flowers or tight cotton bunches are easy to swing, and the impurities and impurities in the falling cotton are reduced.The speed of the beater is generally 500-00 rpm.When processing raw bridges with long fibers, less impurities, or poor maturity, lower hand-to-hand conversion is usually used.2.The loosening machine is separated from the hand to the cotton roller. This spacing affects the tearing force of the beater blade deep inside the cotton layer. The spacing is small and the loosening effect is good, but it is too small to easily damage the fibers.A036 Japanese porcupine cotton opener is suitable for spinning cotton fibers below 31 mm. This spacing is 6 mm and cannot be adjusted. When processing chemical fiber, the comparative spacing is 11 mm.3.The spacing between the beater and the dust stick gradually loosens and the volume increases as the cotton mass, and this spacing gradually enlarges from the import to the export.When the spacing is small, the chance of the cotton block being blocked by the dust rod increases, and the cotton falling increases.Conversely, when the spacing is large, the cotton drop is reduced.Generally spinning medium-sized yarns, the inlet spacing is 10~12 mm, and the outlet spacing is 17~18.5mm.Because this spacing is not easy to adjust, it is generally not adjusted when the properties of raw cotton do not change much.4.The spacing between the beater of the loosening machine and the cotton stripping knife is appropriate for a smaller spacing. Generally, 1.5~2 mm is used. When the beater is too large, it is easy to return to the flower, resulting in silk.