As a professional loosening machine manufacturer, we have been producing and selling loosening machines for many years. As a professional loosening machine manufacturer, Xiaobian will learn from you about how to control the air flow of the loosening machine.

The moving beater is equivalent to the impeller of a fan. Because the beater keeps rotating, the gas is constantly discharged and replenished.In the beater room, the moving impurities are different from the volume and specific gravity of the cotton block.Impurities are small in size and large in specific gravity, and the air flow has little resistance to them, and they are easy to fall from the gap between the dust rods after separating from the cotton mass; while the cotton mass is large in volume and small in specific gravity, the air flow has great resistance to it, coupled with the support of the dust rod, the cotton mass is not easy to fall.Even if some fibers fall out.When the appropriate air flow is encountered to fill in from the dust oak room, it can also return to the beater room with the air flow.Therefore, reasonable control of air flow is not only conducive to improving the effect of mechanical cotton opening and clearing, but also saves cotton. The basic method is to adjust the position of the air replenishment and the air replenishment volume.

In addition to the above-mentioned loosening machine, there are also A035A and B-type mixed loosening machine, which can replace the three equipment A006B, A034 and A016B in the LA series process. It is a high-performance machine that integrates mixing, loosening, and impurity removal.In addition, there are FA101 type four-prick roller loosening machine and FA061 type powerful dust collector. The former can obtain clean small cotton bundles and even reach a single-fiber state, but the fiber

If there is a certain damage, the deployment process should be notified during use.The latter is the use of dust cage mesh to remove fine dust.The two are often used together in the cotton-filling process of rotor spinning.